Rust-Oleum Specialty 247963 Manuel d'utilisation et d'entretien télécharger pdf

TECHNICAL DATA

SPC-21

RUST-OLEUM

SPECIALTY

STAINLESS STEEL PAINT

Form: GDH-341

Rev.: 042914

DESCRIPTION AND USES

Rust-Oleum

Specialty Stainless Steel paint contains

stainless steel pigments to provide a rich, metallic finish.

The finish is suitable for refinishing the exterior of

appliances, such as refrigerators, dishwashers and other

household items such as tabletops, picture frames, home

accessories and more.

.PRODUCTS

SKU Description

247963 Stainless Steel

.PRODUCT APPLICATION

PAINTING CONDITIONS

Apply when temperature is between 50- 90°F (10-32°C)

and humidity is below 85% to ensure proper drying. Not

intended for continuous water submersion or for surfaces

that when heated, exceed 200°F (93°C). Do not use on

objects exposed to heat such as stovetops, oven interiors,

etc.

SURFACE PREPARATION

Clean the surface with a mild detergent or soap and water,

rinse and let dry. Remove loose paint and rust with a wire

brush or sandpaper. Lightly sand glossy surfaces.

Remove dust and debris with a vacuum or clean, lint-free

rag.

Removal of old paint by sanding, scraping or other means

may generate dust or fumes that contain lead. LEAD IS

TOXIC. Contact the U.S.EPA/Lead Information Hotline at

1-800-424-LEAD or log on to www.epa.gov/lead.

PRIMING

Use of Rust-Oleum

primer is recommended for bare

wood and metal to provide adhesion and hiding.

Recommended primers include Stops Rust

7780830

Clean Metal primer for metal and Painter’s Touch

1980502 Gray Primer for wood. A primer is not

recommended for appliances.

PRODUCT APPLICATION (cont.) .

APPLICATION

Mix thoroughly to ensure any settled pigment is re-

dispersed before application. Thin the material 5-10% with

mineral spirits or acetone if necessary. For large surfaces

use a good quality foam roller designed for a smooth finish.

For small areas, use a good quality brush. Apply light,

even coats to ensure even flow and finish. For a glossy

finish, top coat with a Rust-Oleum

Stops Rust

7701830

Crystal Clear Spray after the paint is fully dry. For plastic

surfaces, prime first with Rust-Oleum

Specialty 209460

White Primer Spray.

DRY TIMES

Dry times are based on 70°F (21°C) and 50% relative

humidity. Allow more time at cooler temperatures .Dries to

touch in 2-4 hours and to handle in 5-9 hours. A second

coat may be applied within 1 hour or after 24 hours. One

coat is fully dry in 24 hours.

COVERAGE

One quart of Stainless Steel Paint is designed to cover an

average size, light colored refrigerator in two coats.

CLEAN-UP

Clean the roller and other application tools with mineral

spirits.

1 2

Résumé du contenu

Page 1 - STAINLESS STEEL PAINT

TECHNICAL DATA SPC-21 RUST-OLEUM® SPECIALTY STAINLESS STEEL PAINT Form: GDH-341

Page 2 - TECHNICAL DATA

TECHNICAL DATA RUST-OLEUM® SPECIALTY – STAINLESS STEEL PAINT Rust-Oleum Corporation Form: GDH-341 11 Hawthorn Parkway Phone: 877•3

Commentaires sur ces manuels

Pas de commentaire

Rust-Oleum Specialty 247963 Manuel d'utilisation et d'entretien

Naviguer en ligne ou télécharger Manuel d'utilisation et d'entretien pour Non Rust-Oleum Specialty 247963. Rust-Oleum Specialty 247963 Use and Care Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Rust-Oleum Specialty 247963